Aeronautics Engineer Whitcomb inducted in National Aviation Hall of Fame

Aviation Partners winglet

WASHINGTON, 8 Oct. 2012. The National Museum of the United States Air Force in Dayton, Ohio, inducted Aeronautics Engineer Richard T. Whitcomb into the National Aviation Hall of Fame.

"During his almost four decades of federal service, Whitcomb's fundamental insight into aerodynamics and his practical solutions led to three of the most significant and practical contributions to aeronautics in the 20th century," says Lesa Roe, director of NASA's Langley Research Center in Hampton, Va. Those contributions are: the area rule, supercritical wing, and winglets.

Whitcomb spent his 37-year career at Langley, arriving fresh out of college in 1943. Nine years later, in 1952, the aeronautics engineer discovered and experimentally verified a revolutionary aircraft design principle that became known as the area rule. Whitcomb discovered if he narrowed the fuselage of a transonic airplane so it is shaped more like an old-fashioned soda bottle, he could reduce its drag and increase its speed without adding power. The area rule has been applied to almost every U.S. supersonic aircraft designed. The achievement earned Whitcomb the prestigious 1954 Collier Trophy for the most important aeronautical advance of the year.

Whitcomb's supercritical wing revolutionized the design of jet liners in the 1960s. The key was the development of a swept-back wing airfoil that delayed the onset of increased drag, increasing the fuel efficiency of aircraft flying close to the speed of sound.

In the 1970s, Whitcomb came up with winglets, wingtip devices that reduce yet another type of drag and further improve aerodynamic efficiency. Many aircraft currently sport wingtips that are angled up for better fuel performance.

Whitcomb received the National Medal of Science from President Richard Nixon in 1973, the U.S. Air Force Exceptional Service medal in 1955, the first National Advisory Committee for Aeronautics' (NASA's predecessor) Distinguished Service Medal in 1956, the NASA Exceptional Scientific Achievement Medal in 1959, and the National Aeronautics Association's Wright Brothers Memorial Trophy in 1974.

The engineer also was inducted into the National Inventors' Hall of Fame in 2003, the National Academy of Engineering in 1976 for his pioneering research in the aerodynamic design of high performance aircraft, and the Paul E. Garber First Flight Shrine at the Wright Brothers National Memorial in North Carolina. Whitcomb's alma mater, Worcester Polytechnic Institute in Massachusetts, awarded him an honorary doctorate and its presidential medal.

Related Products

VPX3-453 3U VPX Virtex-6/8640D Digital Signal Processor

The Curtiss-Wright VPX3-453 is a high performance 3U VPX DSP and FPGA processor card th...

CHAMP-FX4 6U OpenVPX Virtex-7 FPGA Processor Card

The CHAMP-FX4 is the flagship 6U product in Curtiss-Wright Defense Solutions’ family of...

PMC-E2001 Audio/Acoustic Waveform Generating PMC Card

PMC-E2001 Delta-sigma PMC features 16-bit resolution with 8 Analog Outputs and 4 Analog...

Related Companies

Curtiss-Wright Defense Solutions

About Curtiss-Wright Defense Solutions Curtiss-Wright Defense Solutions (CWDS) is a lon...

Innovative Integration

  Since 1988, Innovative Integration has grown to become one of the world's leading supplier...

General Micro Systems Inc

Since 1979, General Micro Systems has been providing the most diverse line of single-board comput...
Wire News provided by   

 

Press Releases

One Component, Snap Cure Epoxy Features High Strength Properties

Suitable for a variety of applications in the electronic, aerospace and OEM industries, Master Bond EP...

One Part Epoxy Resists up to 500°F and Meets NASA Low Outgassing Specifications

Master Bond Supreme 12AOHT-LO is a one component epoxy for a variety of bonding and sealing applicatio...

Low Viscosity, One Part Cyanoacrylate Is Non-Toxic and Meets ISO 10993-5 Specifications

Master Bond MB250NT is widely used for a variety of applications ranging from repair to high speed pro...

Thermally Conductive, Two Component Epoxy Passes USP Class VI Tests and ISO 10993-5 Specifications

With biocompatibility and cytotoxicity certifications, Master Bond EP21AOLV-2Med is often selected for...

CURTISS-WRIGHT CONGRATULATES NORTHROP GRUMMAN ON SUCCESSFUL FIRST FLIGHT OF SECOND MQ-4C TRITON UAS

Curtiss-Wright Corporation’s Defense Solutions division applauds Northrop Grumman Corporation (NYSE: N...

Curtiss-Wright’s New Rugged Mobile IP Router Subsystem Features an Integrated Cisco® 5915 ESR Router

Curtiss-Wright Corporation today announced that its Defense Solutions division, a Cisco® Systems Solut...

VICTORY Shared Processing, Fire Control Computer, and Switch for Ground Vehicles Introduced by Curtiss-Wright

Curtiss-Wright Corporation today announced that its Defense Solutions division has introduced a new fu...

GE Announces First Sub-Credit Card-Sized Multi-Function High Definition (HD) Video Tracker

HUNTSVILLE, AL.— OCTOBER 13, 2014—GE’s Intelligent Platforms business today announced at AUSA (Octobe...

Most Popular Articles


All Access Sponsors


Follow Us On...