RIGOL announces expansion of RF portfolio with introduction of RSA3000E real-time spectrum analyzer

RIGOL's new RSA3000E combines the power of a high performance swept spectrum analyzer with the analysis capability of a real-time analyzer at an entry level price point.

Rigol Sts Analyzer

BEAVERTON, Ore. - RIGOL Technologies announced another expansion of their RF test portfolio with the release of a new lower cost real-time spectrum analyzer.

RIGOL's new RSA3000E combines the power of a high performance swept spectrum analyzer with the analysis capability of a real-time analyzer at an entry level price point. The RSA3000E is available in 1.5GHz and 3GHz models with available tracking generators.

The instrument comes standard with 10MHz of real-time analysis bandwidth with seamless capture and a 9.3 microsecond 100% POI. The RSA3000E provides the same 7 rich visualization modes and powerful triggering capability as RIGOL’s other UltraReal products, only at a lower entry price.

The RSA3000E also can function as a traditional swept spectrum analyzer. Resolution bandwidth (RBW) is standard at 1Hz, noise floor as low as -161dBm, phase noise of -102dBc/Hz, and a full span sweep as fast as 1ms provides a powerful analyzer for the entry level customer.

The RSA3000E is also is enabled with advanced analysis capabilities which make it a perfect choice for embedded IOT engineers integrating RF technologies and those customers doing EMI pre-compliance testing.

The integrated EMI pre-compliance option (RSA3000E-EMI) provides a complete EMI Pre-Compliance Solution allowing engineers to measure, compare, analyze, and report on EMI issues throughout their design process. Features like integrated CISPR bandwidths and detectors, simple limit line construction, automated multi-segment scan, and up to three simultaneous detectors make it simple to get initial scans and measurements. Advanced capabilities like real-time detector measurements, automated peak/limit searches and simple correction table integration make configuring more complex test environments and analyzing results easier than ever before. Lastly, comprehensive setup, storage and report generation capabilities make it easy to document, share, and repeat your tests.

The integrated ASK/FSK demodulation option (RSA3000E-ASK/FSK) allows RF engineers to characterize today’s ubiquitous ASK and FSK modulation schemes. The demodulation application gives engineers the ability to utilize up to 13 integrated measurement functions including I/Q waveform and RF envelope, constellation and vector diagrams, symbol level decode, time and frequency, and bit error analysis against known sequences providing quick insight into signal behaviors.

For more information, visit https://www.rigolna.com/.


More in Resources